600w 12v 24v auto ip67 windkraft anlage generator lade entladung regler windmühle brems regler für 400w 600w wind generator
600w 12v 24v auto ip67 windkraft anlage generator lade entladung regler windmühle brems regler für 400w 600w wind generator
Artikel |
WT060 |
||
Wind Turbine |
Max Wind Power |
600W(0~600W) |
|
System Voltage |
12V/24V AC(Auto) |
||
Rated Voltage |
12VAC |
24VAC |
|
AC Rectify DC |
20.8VDC |
41.6VDC |
|
Workable Power |
0W~300W |
0W~600W |
|
Brake |
Start Voltage |
15VAC |
30VAC |
Recover Voltage |
13.5VAC |
27VAC |
|
Max Current |
30A |
30A |
|
Battery |
Lead-Acid & GEL |
||
Rated Voltage |
12VDC |
24VDC |
|
Max Charge Current |
25A |
25A |
|
Over Charge |
14.4V |
28.8V |
|
Floating Charge |
13.8V |
27.6V |
|
Over Discharge Voltage |
10.8V |
21.6V |
|
Lithium Iron Phosphate LiFePO4 |
|||
Rated Voltage |
10.8VDC(3.6V*3) |
21.6VDC(3.6V*6) |
|
Max Charge Current |
25A |
25A |
|
Over Charge |
12.6VDC |
25.2VDC |
|
Floating Charge |
12VDC |
24VDC |
|
Ternary lithium battery |
|||
Rated Voltage |
12.8VDC(3.2V*4) |
25.6VDC(3.2V*8) |
|
Max Charge Current |
25A |
25A |
|
Over Charge |
14.8VDC |
29.6VDC |
|
Floating Charge |
14VDC |
28VDC |
|
Others |
Controlmodel |
PWM |
|
Quiescent current |
8 mA |
||
Waterproof |
IP67 |
||
Operation humiture |
-35℃~+75℃ |
||
Control size |
100×75×23mm |
||
Product Weight |
0.25KGS |
1. this controller can control wind turbines to charge the battery automatically.When the battery is fully charged, brake can be controlled automatically by the interior circuit. When the battery voltage drops to restore voltage level, wind turbine can automatically recover to the battery charging, so as to protect the wind turbine and the battery.
2. Voltage and current limiting are enabled during recharging to ensure the best charging effect. Meanwhile, it provides the maximum protection to the wind turbine and battery.
3. Unique reverse connect protection circuit. For improper operation the positive and negative of battery, don't need to replace the fuse, only to reset the positive and negative in correct point. So the whole system will be more reliable.
4. LED indicate circuit working condition, concise, intuitive, and clear
5. With the independent intellectual property rights of modular design, which makes the performance of the whole system to get the biggest safeguard. Rectification of this controller and braking circuit part, have adopted the company design integration module, no matter from heat, or reliability, further than the traditional design.
6. The comprehensive waterproof protection. If the controller without waterproof but used in easy ooze water environment or the humidity is heavy, then the controller is easy to be corroded and damaged. Our product adopts full seal completely waterproof design which adapt to the heavy humidity, salinity, such as ground water operational environment. The protection grade reaches the IP67 above, even in water can steadily work normally for a long time.
7. Approved ISO9001 quality management system, our factory strictly controls the production and testing quality which guarantees the high quality in maximum. Workable temperature is from 35 ~ 70degree.
Generally speacking, wind turbine is three phase and the output voltage is not very stable. Wind controller is an important components in the wind system. This wind controller is with top quality and excellent performance.
Please connect the wires in the following order. Don’t reverse the positive and negative poles please.
1. Connect the battery. The controller automatically recognizes the system voltage. The first red wire from the right to the left is connected to the positive pole of the battery, and the lastblack wire is connected to the negative pole of the battery.
2. Connect the wind turbine. The three green lines on the middle are connected to the three wires of the wind turbine (if the DC wind power is connected, any two of them are connected to the positive and negative wires of the wind turbine).
Mars Rock Power is established in 2007’. As a world’s leading supplier for solutions for electric energy and new energy. We has powerful strength and is emerged infield of solar inverter, solar inverters solar panels, batteries with built-in solar controller, solar controllers,UPS,witch are used forhousehold ,telecommunication,electricity, infrastructure and industrial makets.
In the past years, we have filed some patent applications among which 9 practical new-type patents and 3 invention patents are included. Besides, we set up our engineering technology R&D center. These efficient measures bring the greater advantage in the competition on the market.
Our manufacturing base covers 30,000M2 which is designed annual producing capacity is 20,000 tons, which now has been put into production utilizing an automatic and intellectual production mode. Advanced machine including: imported calendar, complex configuration, resistivity around Tin-plate tester, slitting machine, machine manufacturing and testing equipment etc. Advanced equipment of rewinding can meet the requirement of automatic welding, using low resistivity of high-quality communication with copper, imported from the material guarantee the high quality. According to the requirements of clean room workshop design and management.
Our belief are:
1. To grow together, to win together with you.
2. To guarantee our quality and competitive prices for you.
3. To give first-grade services to you.